PRO-TEK PFP-60Y Frame Saver Nos Kit

( Brand: Pro-tek ), ( Manufacturer Part Number: PFP-60Y ), ( Part Type: Frame )

Review PRO TEK Frame Saver Kit Nos

The **Pro-Tek PFP-60Y Frame Saver Kit (NOS)** is a meticulously engineered, no-obsolete-stock (NOS) solution designed to protect and extend the lifespan of high-performance automotive frames, particularly those subjected to the rigors of off-roading, racing, or heavy-duty applications. This premium kit is crafted with precision to address the critical vulnerabilities in frame rails, ensuring structural integrity under extreme stress while minimizing the risk of catastrophic failure. At its core, the PFP-60Y features a **60-inch-long, high-strength steel frame saver bar**, strategically positioned to absorb and disperse impact forces away from the frame s critical welds and joints common weak points where fatigue and deformation often occur. Constructed from **heat-treated, cold-rolled steel**, the bar is engineered to withstand repeated high-impact loads, offering superior durability compared to standard frame protectors. The kit includes **two robust mounting brackets**, designed for easy and secure installation using standard hardware, allowing for quick adjustments to accommodate various frame geometries. These brackets are reinforced with **high-strength bolts and washers** to prevent loosening under vibration or dynamic loads, ensuring long-term reliability. Additionally, the PFP-60Y is equipped with **adjustable end caps**, which not only provide a clean, finished look but also help distribute impact energy more evenly across the bar s length. This kit is particularly well-suited for vehicles with **lifted suspensions, aggressive off-road setups, or those participating in competitive racing**, where frame protection is non-negotiable. Whether installed on a classic muscle car, a rugged SUV, or a high-performance race vehicle, the Pro-Tek PFP-60Y delivers a robust, no-compromise solution to safeguard one of the most critical structural components of any vehicle. Its simplicity, strength, and compatibility with a wide range of applications make it an indispensable addition to any serious off-roader s or enthusiast s toolkit.

### Pros and Cons of buying a Pro-Tek PFP-60Y Frame Saver Kit

1. **Effective Protection for Paint and Clear Coat** The PFP-60Y is designed to shield vehicle paint and clear coats from minor scratches, chips, and environmental damage. It creates a sacrificial layer that absorbs impacts, reducing the risk of permanent damage to the original finish.

2. **Easy Installation and Removal** The kit comes with a clear, flexible film that adheres to the vehicle s surface with a removable adhesive. Unlike paint protection film (PPF), it doesn t require professional installation, making it a DIY-friendly option for those comfortable with careful application.

3. **Affordable Compared to Full PPF** While not as comprehensive as full-coverage PPF, the PFP-60Y offers targeted protection at a lower cost. It s ideal for protecting high-impact areas (like the front bumper, hood, and rocker panels) without the expense of full-body coverage.

4. **Clear and Invisible Finish** The film is designed to be nearly invisible when applied correctly, maintaining the vehicle s aesthetic appeal while providing protection.

5. **Durability and UV Resistance** The material is engineered to withstand UV exposure, preventing yellowing or degradation over time, which helps maintain its protective properties longer than some cheaper alternatives.

6. **Versatile Application** The kit can be used on various surfaces, including plastic bumpers, painted panels, and even some trim pieces, making it useful for a wide range of vehicles.

7. **No Permanent Damage Risk** Unlike wax or ceramic coatings, which can degrade over time, the Frame Saver film can be removed without leaving residue if installed and removed properly.

---

1. **Limited Coverage** The PFP-60Y is not a full-coverage solution. It s designed for specific high-risk areas (e.g., lower front, rockers, and underbody), leaving other parts of the vehicle unprotected. If you want comprehensive protection, you d need to purchase additional kits or opt for full PPF.

2. **DIY Installation Challenges** While easier than full PPF, applying the film correctly requires precision. Improper installation can lead to bubbles, misalignment, or poor adhesion, compromising protection. Those with little experience may struggle with smooth application and edge sealing.

3. **Not as Durable as Full PPF** The Frame Saver film is thinner and less rigid than full PPF, meaning it may not withstand high-impact collisions as effectively. It s better suited for minor abrasions, bird droppings, and road debris rather than severe dents or scratches.

4. **Potential for Peeling or Delamination** Over time, the adhesive backing can weaken due to heat, moisture, or improper surface preparation. If not applied to a clean, dry surface, the film may peel or lift prematurely.

5. **Limited Longevity Compared to PPF** While durable, the PFP-60Y may not last as long as high-quality PPF, which can endure for years with proper care. The Frame Saver film typically lasts 3 5 years, depending on usage and environmental conditions.

6. **Not Suitable for All Vehicles** The kit is best for vehicles with smooth, flat surfaces. It may not adhere well to highly contoured or textured areas (e.g., some aftermarket grilles or complex body panels), requiring additional trimming or cutting.

7. **Removal Can Be Tricky** While designed to be removable, improper removal (e.g., peeling too quickly or using incorrect solvents) can damage the underlying paint or clear coat. This requires patience and the right tools.

---

The Pro-Tek PFP-60Y Frame Saver Kit is a practical and cost-effective solution for protecting high-impact areas of a vehicle from minor damage. It s particularly useful for drivers who want an affordable, DIY-friendly alternative to full PPF but don t need comprehensive coverage. The kit excels in ease of application, visibility, and durability for its intended use, making it a solid choice for those focused on protecting specific vulnerable zones.

However, it s not a substitute for full PPF or ceramic coatings if you seek long-term, all-encompassing protection. The trade-off is clear: you get targeted defense at a lower cost, but you ll need to supplement it with other products or manual care for full vehicle protection. For drivers who prioritize convenience, budget, and selective protection, the PFP-60Y is a worthwhile investment. For those seeking maximum durability and coverage, a more extensive protection plan (e.g., full PPF or ceramic coating) would be recommended.

---

- You want affordable, DIY-friendly protection for high-impact areas like the front bumper, rockers, and underbody.

- Your vehicle has smooth surfaces where the film can be applied evenly.

- You re willing to invest time in careful installation and removal.

- You re not seeking full-coverage protection and are okay with supplementing it with other products (e.g., ceramic coating for the rest of the vehicle).

- You need comprehensive protection for the entire vehicle and are willing to pay for full PPF.

- Your vehicle has complex or textured surfaces where the film may not adhere properly.

- You prioritize long-term durability over targeted, budget-friendly protection.

- You lack patience for precise application or removal, as mistakes can compromise the film s effectiveness.

For most drivers looking for a balance between cost and protection, the PFP-60Y is a smart choice just be realistic about its limitations and pair it with other protective measures if needed.

Details:

Items are shipped using USPS, UPS, and FedEx. Frame slider kit is new and in excellent condition, original packaging. If the original package is included it may show signs of wear. Pro-Tek PFP-60Y Frame Saver Kit NOS.

All parts are in stock and ready to ship. Pictures: Thumbnails.

part #: pfp60y price

• $64.99

specifications mocycfra:

• brand: Pro-tek
• mpn: Pfp-60y
• part type: Frame

seller mocycfra:

• city: Ashaway, Rhode Island
• rating: 99.9%
• # reviews: 129177

returns mocycfra:

• paid by: Seller
• policy: Returns Accepted
• time: 30 Days

general mocycfra:

• Motorcycle Scooter Parts Accessories > Body Frame > Frames Parts
• condition: New

offer mocycfra:

• best offers: True
• started: March 5, 2026
• sold: 0
• options: Ship-to-home
• availability: In Stock
• quantity: 1

shipping mocycfra:

• class: Standard, Expedited, One-day
• carrier: USPS, UPS
• cost: $0.00
• type: Calculated
• transit: 5-11 Days
• service: USPS Ground Advantage, USPS Priority Mail Flat Rate Envelope, UPS Next Day Air, UPS 2nd Day Air

payments mocycfra:

• credit card: Discover
• other
• wallet: Apple-pay

Pro-tek PFP-60Y Is Similar To:

• 428-60010c Lockhart Phillips Usa Pro Impact Chrome Frame Slider Yam Yzf (36.8% similar) Shipping requires a street address. Create a return label online on our chapati. Shipping available to USA only...(May 24th, 2018)
• 45003001200 Ktm Sxr Pro Junior Frame Chassis Main Body (28.9% similar) R cycle parts 1998 KTM Sr pro junior 50 frame chassis this is in very good condition and shows normal signs of wear. Removed from: 1998 KTM 50 Sr pro jr with unknown miles please review all pictures to assess the condition of item...(February 22nd, 2019)
• 45003001400 Ktm Junior Adventure Frame Pro Jr Sxr Nice (30.9% similar) I reserve the right to end any of my listings at anytime due being sold locally. Do your homework before purchasing you lose. Its a dirt bike part. Just very minor scuffs from normal riding and tool marks. Bolt it on and pop wheelies. Good usable oem frame removed from a great running 2001 KTM 50 ...(June 13th, 2018)
• 464-2400 Lockhart Phillips Usa Pro Impact Frame Sliders Kawi Ninja (45.9% similar) Shipping available to USA only. Create a return label online on our chapati. Shipping requires a street address...(October 27th, 2018)
• 464-24011 Lockhart Phillips Black Usa Pro Impact Frame Sliders (40% similar) Shipping available to USA only. Shipping requires a street address. Create a return label online on our chapati...(October 27th, 2018)
• 5297n Puig Black Pro Frame Sliders Diversion 5297000000788 (35.6% similar) 8 ounces package dimensions 13. Pig 5297N black pro frame sliders XJ6 diversion 09' - 13' wider surface area for a greater protection are with grey rubber ends precise fit and instructions included no modifications required technical details brand model item weight 5 inches item model number 5297N ...(July 14th, 2018)
• 5298n Puig Yzf Black Frame Slider Pro Yam 5298000000785 (32.7% similar) Create a return label online on our chapati. Shipping available to USA only. Shipping requires a street address...(August 24th, 2018)
• 5533a Puig Pro Frame Slider Replacement Shock Ends Pair Rubber Blue (38.2% similar) This is only for the rubber ends, does not include anything else shown in image. Brand new pig pro frame slider replacement shock ends pair rubber blue universal product features: of for sliders. Exact color hue may vary from image shown...(April 27th, 2018)
• 5533p Puig Pro Frame Sliders Rubber End Bumper Gray (38.3% similar) Pro frame sliders rubber end bumper pig with a compact design are perfect to save your motorbike made material highly resistant the blows that protect motorbike from intermediate and light falls size color gray options brand condition new part number 5533P notes item sells only one part, picture ...(June 8th, 2018)
• 5533r Puig Pro Frame Slider (48.6% similar) Brand new pig pro frame slider replacement shock ends pair rubber red universal product features: of for sliders. Exact color hue may vary from image shown. This is only for the rubber ends, does not include anything else shown in image...(November 11th, 2017)
• 5533v Puig Pro Frame Slider Replacement Shock Ends Pair Rubber Green (37.8% similar) This is only for the rubber ends, does not include anything else shown in image. Brand new pig pro frame slider replacement shock ends pair rubber green universal product features: of for sliders. Exact color hue may vary from image shown...(September 30th, 2018)