MITSUBISHI 4000A123 Front Center Bracket Cradle

( Manufacturer Part Number: 4000A123 ), ( Type: Subframe ), ( Placement On Vehicle: Front ), ( Performance Part: No ), ( Tag : 21318 )

Review MITSUBISHI Front Subframe Bracket Cradle Oem fits LANCER 2008–2015

The **Mitsubishi 4000A123 Front Center Bracket/Cradle** is a precision-engineered suspension component designed specifically for the **2008 2015 Mitsubishi Lancer** models, serving as a critical link between the vehicle s subframe and the front suspension system. Crafted from high-strength steel, this bracket is built to withstand the rigors of daily driving, providing structural integrity while ensuring proper alignment and stability for optimal handling. The **4000A123** is a direct replacement for the original equipment manufacturer (OEM) part, maintaining the same mounting points, dimensions, and load-bearing capacity to prevent sagging, misalignment, or premature wear in the suspension components. Whether installed during routine maintenance, a suspension refresh, or a performance upgrade, this bracket helps maintain the Lancer s ride quality, steering responsiveness, and overall structural stability. Its robust construction and compatibility with aftermarket suspension upgrades make it an essential component for both stock and modified vehicles, ensuring longevity and reliability under various driving conditions.

### **Pros and Cons of Buying a Mitsubishi 4000A123 (2008 2015 Lancer Front Center Bracket/Cradle)**

The **Mitsubishi 4000A123 front center bracket/cradle** is a widely available and commonly used part for the 2008 2015 Lancer (especially the 1.8L and 2.0L models). Here are the key advantages of purchasing this part:

1. **Widespread Availability** Due to its popularity, this part is easy to find from various suppliers, including eBay, Amazon, auto parts stores (AutoZone, O Reilly, NAPA), and Mitsubishi dealerships. It is also frequently listed as a used or refurbished part, reducing costs.

2. **Budget-Friendly** Compared to OEM (Original Equipment Manufacturer) parts, aftermarket versions of this bracket/cradle are significantly cheaper, often costing between **$20 $60**, depending on quality and source. This makes it a cost-effective solution for repairs.

3. **Compatibility** This part is designed specifically for the **2008 2015 Mitsubishi Lancer (4000A123 trim)**, ensuring a proper fit without modifications. It is also compatible with some **Chrysler 200 and Dodge Avenger** models due to shared platforms.

4. **Common Failure Point** The front center bracket/cradle is a known wear item, especially in vehicles with high mileage or those that have experienced suspension damage. Replacing it is a standard procedure for addressing **clunking noises, misalignment, or excessive play** in the front suspension.

5. **DIY-Friendly Installation** While some suspension work can be tricky, replacing this bracket/cradle is a manageable job for those with basic mechanical skills. It typically requires **removing the wheel, disconnecting the sway bar link, and replacing the bracket**, which can be done with standard tools.

6. **Prevents Further Damage** Ignoring a failing bracket can lead to **sway bar damage, misaligned wheels, or even steering issues**. Replacing it early helps maintain proper suspension geometry and avoids more expensive repairs down the line.

7. **Aftermarket Options with Good Reviews** Many aftermarket brands (such as **Dorman, Fel-Pro, or local suspension shops**) offer high-quality replacements that match or exceed OEM standards. Customer reviews often highlight durability and ease of installation.

---

1. **Quality Variability** Not all aftermarket parts are created equal. Some cheaper or generic replacements may be **poorly machined, made from substandard materials, or lack proper heat treatment**, leading to premature failure. Always check reviews or supplier reputation before buying.

2. **Potential for Counterfeit Parts** Due to its popularity, this part is sometimes sold as **counterfeit or re-machined OEM parts** that don t meet original specifications. Buying from **reputable sellers** (eBay verified, Amazon Prime, or trusted local shops) helps mitigate this risk.

3. **Installation Challenges** While DIY-friendly, improper installation can lead to **loose bolts, misalignment, or even damage to the sway bar or subframe**. If unsure, consulting a mechanic or following a **detailed step-by-step guide** is advisable.

4. **Additional Wear Items May Be Needed** If the bracket failure is due to **excessive wear in the surrounding suspension components** (e.g., sway bar links, bushings, or ball joints), replacing just the bracket may not fully resolve the issue. A **full suspension inspection** is recommended.

5. **Limited Longevity in Rough Conditions** Vehicles driven on **rough roads, off-road, or with aggressive driving habits** may experience **faster wear** on the replacement bracket, especially if lower-quality materials were used.

6. **Potential for Misalignment After Replacement** If the bracket is not installed **square to the subframe**, it can cause **uneven tire wear or handling issues**. Proper alignment may be needed post-installation.

7. **Dealer vs. Aftermarket Cost Disparity** While aftermarket parts are cheaper, **OEM or dealer-supplied parts** (if available) may last longer but cost significantly more (**$100 $200 **). This is a trade-off between cost and longevity.

---

### **Conclusion**

The **Mitsubishi 4000A123 front center bracket/cradle (2008 2015 Lancer)** is a **practical and cost-effective** part to replace when experiencing suspension-related issues. Its **widespread availability, affordability, and ease of installation** make it a strong choice for most owners. However, **quality control, proper installation, and potential additional wear items** must be considered to ensure a long-term fix.

For **most DIYers and budget-conscious owners**, an **aftermarket high-quality replacement** (from a trusted supplier) is the best option. If budget allows and longevity is a priority, an **OEM or reputable aftermarket premium part** may be worth the extra cost.

---

### **Final Recommendation**

1. **Buy from a Reputable Source** Opt for **Dorman, Fel-Pro, or a well-reviewed aftermarket brand** rather than the cheapest generic option. Check **eBay seller ratings, Amazon reviews, or local suspension shops** for quality assurance.

2. **Inspect for Additional Wear** Before purchasing, check the **sway bar links, bushings, and ball joints** replacing them simultaneously can prevent future issues.

3. **Follow Installation Guidelines Carefully** Use a **torque wrench** and ensure the bracket is **properly aligned** to avoid handling or alignment problems.

4. **Consider a Professional Install** If unsure about suspension work, a **mechanic with suspension experience** can ensure a proper fit and alignment.

5. **Monitor for Recurring Issues** If the noise or problem persists after replacement, inspect for **damaged sway bars, subframe cracks, or improperly seated components**.

**Verdict:** **Yes, purchase this part** it s a **wise and cost-effective solution** for the 2008 2015 Lancer s common front suspension bracket failure, provided you choose a **quality replacement and install it correctly**.

Details:

This is the sole and exclusive warranty provided for this part. Sheet metal parts are warranted only against factory corrosion under normal use. Locations without a dock or forklift require lift gate service, which must be disclosed at time of purchase. Warranty This part includes a 1-Year Limited from the date of purchase.

Quality Assurance. Tag Number 21318, Year/Year Range 2008 -2015, Make Mitsubishi, model Lancer, Sub model Evolution GSR, Series. Wide Range of Parts. All parts are tested and inspected for reliability performance.

If damage occurs during shipping, buyers must provide sufficient documentation to support a carrier claim. Airbags and SRS components are sold AS IS with no warranty. Fast Reliable.

part #: 4000a123 prices

• $176.47-$194.49

specifications mocycfra:

• for models: Lancer
• for makes: Mitsubishi
• for years: 2008-2015
• mpn: 4000a123
• type: Subframe
• placement on vehicle: Front
• performance part: No
• tag : 21318

payments mocycfra:

• other
• credit card: Discover
• wallet: Paypal

seller mocycfra:

• # reviews: 6850
• city: Nixa, Missouri
• rating: 99.9%

returns mocycfra:

• policy: Returns Accepted
• time: 60 Days
• paid by: Seller

offer mocycfra:

• options: Ship-to-home
• sold: 0
• best offers: True
• started: March 11, 2026
• quantity: 1
• availability: In Stock

shipping mocycfra:

• cost: $19.00
• class: Standard
• service: Standard
• type: Fixed
• transit: 3-7 Days

general mocycfra:

• Motorcycle Scooter Parts Accessories > Body Frame > Frames Parts
• condition: Used

Mitsubishi 4000A123 Is Similar To:

• Mitsubishi 4100a342 2022-2023 Outlander Right Rear Subframe Bracket Stay (68.5% similar) Part removed from a 2022 mitsubishi out lander 2.5 liter 4 cylinder, paint code: X42B amethyst black pearl/Labrador pearl mileage: 260 computers, modules and other electronic devices may need to be programmed your vehicle before proper working order. Verify part # - listed fitment is approximate ...(May 8th, 2024)
• Sherman Parts Mioutl13-84q-0 Front Bumper Reinforcement For Mitsubishi Outlander Sport 2011-2019 Steel (24.6% similar) Key features: material: high-quality steel ensures maximum strength and durability. Front bumper reinforcement for mitsubishi out lander sport 2011 - 2019 steel: enhance the durability and safety of your with our robust precision-engineered. Specifically designed to fit model's from the years ...(March 20th, 2025)